Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)

Method for studying shape of cutting tool by light field recorder

Authors
V.V. Maksarov, V.E. Makhov
Corresponding Author
V.V. Maksarov
Available Online July 2017.
DOI
10.2991/aime-17.2017.73How to use a DOI?
Keywords
cutting tool; threading tap; shape of the surface; light field recorder; wavelet analysis; continuous wavelet transform; CWT; frequency-coordinate analysis
Abstract

A technique for controlling the shape of the surface and the defects of the cutting tool by an optoelectronic system of the light field is proposed. The physical and information models of the optical-electronic light field recorder, the mathematical model of the edge of the cutting surface of the tap, which allow one to construct the optimal optical scheme for image registration and create algorithms for determining the deviation of the tool shape from the reference profile by wavelet analysis and frequency-coordinate transformation are considered. It is shown that the use of frequency-coordinate transformation algorithms allows determining deviations of geometric shapes of working surfaces, detecting local defects less than 1% of the height of the profile of the cutting part of the tool

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)
Series
Advances in Engineering Research
Publication Date
July 2017
ISBN
978-94-6252-406-4
ISSN
2352-5401
DOI
10.2991/aime-17.2017.73How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - V.V. Maksarov
AU  - V.E. Makhov
PY  - 2017/07
DA  - 2017/07
TI  - Method for studying shape of cutting tool by light field recorder
BT  - Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)
PB  - Atlantis Press
SP  - 452
EP  - 457
SN  - 2352-5401
UR  - https://doi.org/10.2991/aime-17.2017.73
DO  - 10.2991/aime-17.2017.73
ID  - Maksarov2017/07
ER  -