Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)

Mathematical modelling of heat accumulator for thermal preparation system of road-building machinery

Authors
Vitaliy Valerievich Konev, Oksana Borisovna Krut, Egor Viktorovich Polovnikov, Lyudmila Vasilievna Dolzhikova, Elena Evgenievna Rood'
Corresponding Author
Vitaliy Valerievich Konev
Available Online July 2017.
DOI
10.2991/aime-17.2017.55How to use a DOI?
Keywords
operation, modeling of the thermal accumulator, thermal preparation, heat transfer, heat recovery system, low negative temperatures
Abstract

In the conditions of autonomous functioning of special equipment, there is a need to use its internal sources. This can be accomplished using a heat recovery system of the internal combustion engine. For this purpose, the authors suggest a heat accumulator. The mathematical modelling of the thermal state of the heat accumulator in the cooling stage is done. The main factors affecting the cooling time of the thermal accumulator are the thickness of the insulation of the heat accumulator, the mass of coolant, coolant temperature, air temperature, wind speed. The authors also developed a mathematical model of the cooling process of the heat accumulator in a general way. It is presented in graphical form, which makes it easier to determine the time of cooling the heat accumulator in the process of its designing. For automatic calculation, an algorithm has been developed and implemented in the program to determine the dimensionless temperature and criterion Bio.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)
Series
Advances in Engineering Research
Publication Date
July 2017
ISBN
978-94-6252-406-4
ISSN
2352-5401
DOI
10.2991/aime-17.2017.55How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Vitaliy Valerievich Konev
AU  - Oksana Borisovna Krut
AU  - Egor Viktorovich Polovnikov
AU  - Lyudmila Vasilievna Dolzhikova
AU  - Elena Evgenievna Rood'
PY  - 2017/07
DA  - 2017/07
TI  - Mathematical modelling of heat accumulator for thermal preparation system of road-building machinery
BT  - Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)
PB  - Atlantis Press
SP  - 337
EP  - 342
SN  - 2352-5401
UR  - https://doi.org/10.2991/aime-17.2017.55
DO  - 10.2991/aime-17.2017.55
ID  - Konev2017/07
ER  -