Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)

Development of method for determining bottom-hole pressure in production wells

Authors
Vladislav I. Galkin, Inna N. Ponomareva, Irina A. Chernykh
Corresponding Author
Vladislav I. Galkin
Available Online July 2017.
DOI
10.2991/aime-17.2017.38How to use a DOI?
Keywords
oil producing well; bottom-hole pressure; bottom-hole pressure monitoring; multivariate mathematical models; correlation analysis; correlation number
Abstract

The paper is devoted to the effectiveness increase of monitoring the value of seam pressure when operating oil-producing wells. This problem is relevant for well operation when using subsurface measuring systems. In such cases, seam pressure is determined by recalculation of the dynamic level value, measured at wellhead. The absence of the method of reliable characterization of a multiphase flow leads to substantial errors in the seam pressure, measured in that way. In the present paper, a principally different approach to determination of seam pressure is considered, which is based on the mathematical processing of the accumulated data on parallel wellhead and subsurface measurements. Oil-producing wells, exploiting Famenskaya deposit of Ozyorny field, were chosen as an object of the research. The data on 579 parallel wellhead and subsurface measurements were processed. The use of incremental regression analysis made it possible to develop multidimensional models for Famenskaya deposit, allowing one to determine the seam pressure value in the absence of possibility of its direct measurement. A principle advantage of the developed method is the use of only those parameters as initial data, the determination of which during well operation is not accompanied by difficulties. Comparison of seam pressures, measured and calculated by means of the obtained models, demonstrates high reliability of the developed method

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)
Series
Advances in Engineering Research
Publication Date
July 2017
ISBN
978-94-6252-406-4
ISSN
2352-5401
DOI
10.2991/aime-17.2017.38How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Vladislav I. Galkin
AU  - Inna N. Ponomareva
AU  - Irina A. Chernykh
PY  - 2017/07
DA  - 2017/07
TI  - Development of method for determining bottom-hole pressure in production wells
BT  - Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)
PB  - Atlantis Press
SP  - 227
EP  - 232
SN  - 2352-5401
UR  - https://doi.org/10.2991/aime-17.2017.38
DO  - 10.2991/aime-17.2017.38
ID  - Galkin2017/07
ER  -