Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)

Perspectives of application of aerated concrete for 3D building printing

Authors
Valery Lesovik, Evgeny Glagolev, Michail Elistratkin, Maksim Absimetov, Alina Ermolaeva
Corresponding Author
Valery Lesovik
Available Online July 2017.
DOI
10.2991/aime-17.2017.33How to use a DOI?
Keywords
building printing, constructions with higher thermal resistence, non-autoclaved aerated concrete, composite binder, setting up control time
Abstract

Adaptation of the technology for a 3D building printing system aimed at producing non-autoclaved aerated concrete allows solving a task of how to create wall structures with high thermal insulation properties without using other materials, and with the increase of molding devices' productivity due to extension in layered mass. The main step towards the adaptation is the separation of the molding aerated concrete mixture into two components: basic and activating aerated processes, setting up and hardening. Mixing the components should take place in the continuous mode directly before extrusion

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)
Series
Advances in Engineering Research
Publication Date
July 2017
ISBN
978-94-6252-406-4
ISSN
2352-5401
DOI
10.2991/aime-17.2017.33How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Valery Lesovik
AU  - Evgeny Glagolev
AU  - Michail Elistratkin
AU  - Maksim Absimetov
AU  - Alina Ermolaeva
PY  - 2017/07
DA  - 2017/07
TI  - Perspectives of application of aerated concrete for 3D building printing
BT  - Proceedings of the International Conference "Actual Issues of Mechanical Engineering" 2017 (AIME 2017)
PB  - Atlantis Press
SP  - 197
EP  - 201
SN  - 2352-5401
UR  - https://doi.org/10.2991/aime-17.2017.33
DO  - 10.2991/aime-17.2017.33
ID  - Lesovik2017/07
ER  -