Proceedings of the 2016 2nd International Conference on Artificial Intelligence and Industrial Engineering (AIIE 2016)

Research on Influence of Milling Parameters on Machining Deformation of Rectangular Thin- Walled Parts

Authors
Jing Li, Ping Xi, Yang Jiao
Corresponding Author
Jing Li
Available Online November 2016.
DOI
10.2991/aiie-16.2016.107How to use a DOI?
Keywords
milling; parameters; thin-walled parts; milling; deformation; finite element analysis
Abstract

Aiming at the problem that the machining accuracy of rectangular thin-walled parts are difficult to ensure because of poor rigidity and machining deformation which is easy to produce extremely, it used the three-dimensional finite element method and did analysis and calculation of rectangular thin-walled parts under the action of milling force. It obtained the machining deformation law and the changing trend of the machining deformation of rectangular thin-walled parts with milling parameters in the different milling parameters circumstance by adjusting the milling parameters(milling depth, milling width, feed rate). It provided the theoretical basis for the selection and optimization of thin-walled parts milling parameters in the actual milling process.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 2nd International Conference on Artificial Intelligence and Industrial Engineering (AIIE 2016)
Series
Advances in Intelligent Systems Research
Publication Date
November 2016
ISBN
978-94-6252-271-8
ISSN
1951-6851
DOI
10.2991/aiie-16.2016.107How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Jing Li
AU  - Ping Xi
AU  - Yang Jiao
PY  - 2016/11
DA  - 2016/11
TI  - Research on Influence of Milling Parameters on Machining Deformation of Rectangular Thin- Walled Parts
BT  - Proceedings of the 2016 2nd International Conference on Artificial Intelligence and Industrial Engineering (AIIE 2016)
PB  - Atlantis Press
SP  - 466
EP  - 469
SN  - 1951-6851
UR  - https://doi.org/10.2991/aiie-16.2016.107
DO  - 10.2991/aiie-16.2016.107
ID  - Li2016/11
ER  -