Proceedings of the 21st International Conference on Industrial Engineering and Engineering Management 2014

+ Advanced search
136 articles

Correlation Analysis and Dynamic Evaluation on City Aquatorium Ecological Service Value——Taking Xianning City of Hubei Province as an Example

Pingfan Liao, Xiaoyang Yang, Zhi Chen, Jin Zhang
City aquatorium is an all-important subsystem in the city complex ecosystem, and it has vital function on maintaining the ecological balance and developing economy in the city. Taking Xianning City as an example, and quoted from the water resources and social economic statistical data in Xianning City...

Analysis of Hot-Topics and Prospect for Study on Theory of Financial Management in China

Yudi Zhou, Rong Fu
Although the start of China's financial management is late, but after the development of about half a century, relevant theoretical research has matured, and research focus is changing. Based on present situation, this paper tries to count and analyze a lot of documents, which are published in Chinese...

Research on Improvement of Plant Layout Based on Process Analysis

Dawei Zhou, Litao Wang, Liying Feng, Daozhi Zhao, Tiansong Guan
Analyzed the production processes and proposed a solution to improve plant layout, this paper applied process analysis to improve plant layout and explored another effective way to improve plant layout for small and medium manufacturing enterprises. A case explained the practicality and effectiveness...

Comparison Study on Algorithms for Vehicle Routing Problem With Time Windows

Can Yang, Zhaoxia Guo, Lingyuan Liu
This paper investigates and compares heuristic algorithms for the vehicle routing problem with time windows. Three heuristic algorithms were proposed firstly through combining three classic heuristic algorithms with the cross exchange method (cross) and the 2-opt exchange heuristic (2-opt) respectively....

Research on Subway Traffic Dispatcher Team Error Issues in Accident Management

Feng Lin, Jie Wang, Lianfeng Xu
In order to prevent and reduce human errors of the subway dispatching system in the accident response process, a subway dispatcher team emergency response cycle framework was built and an application and analysis of the framework with a typical case was also provided. Results showed that different situations...

An Advanced Multi-objective Genetic Algorithm for Mixed-model Two-sided Assembly Line Balancing

Zhengmei Jie, Kaihu Hou, Yujie Zheng, Lei Wang, Cheng Chen, Yingfeng Zhang
In this study, an advanced multi-objective genetic algorithm (AMGA) is proposed for solving type mixed model two-sided assembly line balancing (MTALB-I) problem. Multi objective mathematical model is established and the AMGA is used to solve. The three minimal objectives are the number of stations, the...

Simulation of an Astronaut’s Connecting Bolt Action in Orbit

Aiping Yang, Xin Zhang, Guang Cheng, Huimin Hu, Chau-Kuang Chen
This study primarily focuses on the simulation of an astronaut connecting bolt action in orbit. The upper limb model was established, which included three segments of upper arm, forearm, and hand, as well as three revolute joints of shoulder, elbow, and wrist. Joint kinematical parameters during one...

Universal Simulation Model of Autonomous Vehicle Storage & Retrieval System

Saipeng Zhang, Ning Zhao, Yinfan Zhao
Autonomous vehicle storage and retrieval system (AVS/RS) is a relative new solution for automatic storage and retrieval, which is based on autonomous vehicle technique. Based on conventional simulation technique, warehouse designers have to build different simulation models according to different design...

Modeling Technology on Aircraft Cable Harness in Virtual Assembly Environment

Jing Yan, Wei Hong, Lu Ju, Bi Lan, Xuhui Li
Aircraft cable harness virtual assembly technology has an important influence on improving the efficiency of the aircraft assembly and performance of the machine. Modeling on aircraft cable harness is elementary and difficult. For aircraft cable harness elements, there are two kinds of the most common...

Implementing Low Carbon Improvement Practices in Supply Network

Yongjiang Shi, Jialun Hu
This paper aims to discuss the low carbon practices development in manufacturing companies. As the environmental-friendly pressure and internal energy-saving motivation are growing, firms start to implement de-carbonization projects across their supply chain. This study conducts case studies to these...

Energy Consumption Forecast Model of Urban Residential Buildings in Hainan

Liping Fu, Xiaogang Li, Yuan Liu
To study energy consumption influencing factors of urban residential building in Hainan, on the basis of questionnaires which inquire the actual energy consumption of the target residents, and by means of correlation analysis and multiple regression analysis through SPSS software, an empirical study...

Research on CBR-RBR Fusion Reasoning Model and its Application in Medical Treatment

Jiang Shen, Jin Xing, Man Xu
The phenomenon exist in the reasoning process of medical decision-making system are insufficient or incomplete information, information singularity, imprecise measurement, low reliability, susceptible outside interference, which make the inference efficiency and accuracy lower in complex medical decision-making...

Research and Application of an Intelligent Decision Support System

Xiaoqing Zhou, Jiaxiu Sun, Shubin Wang
This paper discusses a new decision-support system that integrates data warehouse, knowledge warehouse and model warehouse. Contrast to the fixed model of the old decision-support system and it’s limited application, the new system can overcome the shortcoming of the old system efficiently, and also...

Design and Development of Parametrical Modeling Module for Warheads

Zhifang Wei, Hui Zuo, Fang Wang, Xiaoguang Li
The software platform for damage efficiency optimization of small arms provides convenient conditions for designers to complete the demonstrating, designing work and optimization of projectiles. Based on Solidworks 2007, by VC++, and using OLE technology, procedure module of parametric modeling of warhead...

The Correlation of Urban Cluster and Cultural Industry Cluster

Guojun Chai
The development of urban cluster and cultural industry cluster complement each other. Exploring the inner correlation between the development of the urban cluster and cultural industry cluster from the quantitative perspective and disclosing their interior rules of development, may have great significance...

Effect of New CEO Power on Managerial Compensation Gap: A Conceptual Model

Shuo Wang, Changzheng Zhang
A new CEO has very different motivations and faces more strict monitoring strength compared to a senior CEO. Therefore, logically new CEOs should have different manipulation choices in managerial compensation setting process. Therefore, a conceptual model focusing on manipulation effects of new CEO’s...

Claim Practice for the Drainage of Foundation Pit of Huangjinping Hydroelectric Station

Li Tu, Limin Jia
On the one hand, change claims of hydroelectric engineering are the effective means for the contractor to reduce losses and improve profit. On the other hand for the owner, if the engineering change claim work is managed well, it will reduce project costs and improve project management efficiency. The...

The Role of External Knowledge Search in Firms’ Innovation Performance: Evidence from China

Hang Wu
Open innovation has emerged as the main innovation mode in the era of knowledge-driven economy. However, existing research pays little attention to the precise classification of international and local knowledge search, and ignores their joint impact on innovation performance. This study examines how...

Study on Marketing Strategy for Aviation Manufacturing Enterprise Based on Domestic Military Market

Li Zhang, Fajie Wei, Shan Lu
Recent years, government is actively promoting innovation in technology defense industry by breaking the closed system and introducing the market competition mechanism, hoping to make full use of the whole social resources and improve weaponry and equipment production capacity. To seek for survival and...

Based on Credibility Measure the Force of Mortality in Life Insurance Actuarial

Minying Yuan, Wenwen Han, Dajun Sun
In order to establish continuous life insurance actuarial model theoretical system based on credibility measure, this paper defined the force of mortality based on credibility measure, and deduced the expressions of future lifetime distribution function, survival function, density function and actuarial...

Research on Health Service Cost Accounting Based on the Application of TDABC

Li Luo, FengJiao Wang, Wei Cheng, Fang Qing, Ting Zhu
China’s health cost is increasing rapidly, the component of cost is complex, and the method of cost accounting is confusing. In order to better manage and control healthcare costs, we explore the use of Time-Driven Activity-Based Costing (TDABC) in this study, and describe the particular procedure of...

The Distribution of Residual Control Rights under Self-interest Behavior

Xing Bi, Jin Dong
PPP (Public-Private-Partnerships) has been widely used because of its high investment efficiency, high degree of market and the advantages of optimizing the allocation of resources. In the pre-investment stage study of PPP projects, this paper considers the self-interested behavior of the private sector...

Study on the Relationship between the Government and Enterprises Based on Dynamic Game

Yicheng Feng
The relationship between the government and the enterprises determines the freedom and vitality of a country's economic development to a certain extent. Under the market conditions, the internal logic relationship exists between the government and enterprise, in view of the contradiction between the...

Improved Computer Methods for Sequencing Operations for U-shaped Assembly Lines

Liyun Xu, Loïc Bélec, Wei Liu, Qifang Gu, Aiping Li
U-shaped lines are considered to have a number of advantages over traditional lines. COMSOAL is a recurrent procedure for assembly lines balancing, and it stands for computer method for sequencing operations for assembly lines. In this paper, an improved U-COMSOAL is proposed to solve some problems of...

Multiscale Analysis of Reconfiguration for Reconfigurable Manufacturing Systems

Yandi Bao, Guoxin Wang, Jingjun Du, Yan Yan
Reconfigurable manufacturing systems (RMS) show multiscale characteristics on the granularity of reconfiguration. In order to assist manufacturing enterprises to appropriately select a reconstruction scale, the performance of manufacturing system was transformed into signal, which was disposed to be...

The Analysis Of the Industry-University-Research Cooperation Of China Based On ISM

Peng Shen, Lu Feng, Ying Shen
At present the most important of our national strategy is to deepen the reform of science and technology, to promote the closer integration of technology and economy and to accelerate the construction of the national innovation system, which is combined of enterprises, market and Industry-University-Research...

Study on Evaluation System of Product Quality Oriented Supply Chain

Xingyu Jiang, Dongbe Hu, Chao Gao, Xinmin Zhang, Li Li
Seeing that the influence quality factors in operation process of supply chain are complex, multi-level, interconnection and interaction, which possess uncertainty and fuzziness obviously, product quality building process in supply chain is deeply analyzed, and evaluation system model of product quality...

Research on Quality and Efficiency of the Medical Decision-Making System Based on Robustness Theory

Jiang Shen, Yanhong Lin, Man Xu
Based on analyzing the reasons for the vulnerability caused by medical decision-making system and the formation process and the factors leading to the vulnerability of the system and its impact methods and results, we can establish the interference model. Through analyzing the vulnerability of the health...

A Convergent Nonlinear Smooth Support Vector Regression Model

Liru Tian, Xiaodan Zhang
Research on the non-smooth problems in the nonlinear support vector regression. A nonlinear smooth support vector regression model is proposed. Using a generalized cubic spline function approach the non-smooth part in the support vector regression model. The model of the nonlinear smooth support vector...

Three-Dimensional Decoration UCD Cross-Platform Interactive Software Design Methods Base on UCD in Consumption Patterns of Information

Zhendong Wu, Weiming Guo, Xiaoqun Ai
At present the information products and information services for the consumer object information consumption, has gradually become the mainstream of the times. In this paper, a UCD based furniture, home furnishing, display design, network marketing one-stop complete, means of realizing design research...

Research on Data Analysis Model of Risk Assessment in Oil and Gas Drilling Operation

Jiadi Li, Tingke Li, Wei Li, Lin Jiang
Through the establishment of multidimensional data model based on data warehouse, we can convert the original application-oriented data structures in the database for the analysis of multidimensional data structures. Multidimensional data model provide a good data analysis environment for risk assessment...

Design of the Integrity Inspection System for the Resistor Color Code

Linwei Mao, Yaoguang Hu, Jingqian Wen, Jiawei Ke
To reduce the inspection cost and make sure the electronic components have high quality and performance, it is important for the research and design of more advanced automation quality inspection systems. In this paper, an integrity inspection system for the resistor color code is proposed and the detailed...

Differences in Episodic Memory between Patients with Alzheimer’s Disease and Normally Aging Individuals

Minsheng Chen, Weiru Chen
There are numerous problems associated with a greater prevalence of old age, one of which is dementia. The prevalence of dementia increases year by year, and patients with Alzheimer's disease account for the largest proportion of patients with dementia. In early stages of Alzheimer's disease patients...

Optimal Capacity Allocation in an Assembly Job-shop using a Gradient-based Heuristic

Liang Huang, Xin Shi
This paper presents a new capacity allocation approach to design or redesign an assembly job-shop with stochastic orders and processing times. The solutions for capacity allocation can be adding or removing workers and machines at every work stations. A bi-criteria objective function comprising tardiness...

Process Optimization for Wiring Technology of Aircraft Harness Based on ECRS Principle

Pei Gao, Jingqian Wen
In this paper, wiring technology during aircraft harness manufacturing is regarded as the research object, shortcomings of the existing technology have been analyzed, such as confusing procedures and low efficiency. To improve the situation, an optimization scheme was proposed from process flow and human-machine...

The Application of Standard Hour in Commercial Aircraft Manufacturing Industry

Shunlong Jiang
The paper illuminates a signification part in the application of industry engineering that is using standard hour to guide and monitor the aircraft production through the examples of commercial aircraft enterprise. This method achieves notable results through long time practice and application. In order...

SMT Optimization Based on the Cellular Genetic Algorithm

Xuan Du, Dengqiao Li, Lili Sun
This paper studied the surface mounting process optimization of the turret SMT machine. Firstly, it decomposed the issue into two sub-problems, which includes problems of component placement sequence and feeder arrangement. It built a surface mounting process optimization model based on the analysis...

Study on Measure of Matching Degree between Management Platform and Information Platform in the Context of IS Success Based on Kullback-Leibler Divergence

Qian Wang, Jin Shi, Feng Liang
Aim to solve the lack of quantitative method on measure of information system success and IT project management, the article advance the principle and related technique on measure of matching degree between management platform(MP) and information platform(IP) based-on Kullback-Leibler divergence(KLD)....

Research on the Risk Identification for the International Engineering Contracting EPC Projects

Tang Tang
The International Engineering Contracting EPC projects have the characteristics of high risk, intense complexity and numbers of uncertainties. Thus, as the basis of the risk assessment, risk response and risk control, risk identification can achieve the goal of systematically, dynamically identify, classify,...

Social Capital of Private Businessman Class in China

Jiadi Fu, Guanjian Qiu
This article aims to discuss the operational logic of the merging class of private businessman, with an emphasis on the important role of social capital. It begins with a review of the development of social capital and of the previous research on social capital of private businessman in China. Based...

Study on Prediction of Urbanization Level Based on GA-BP Neural Network ——Taking Tianjin of China as the Case

Gang Hao
In this paper, we establish evaluation index system of urbanization level, The three main factors and comprehensive factor score are obtained by factor analysis, we impot the BP neural network improved by the genetic algorithm. Urbanization level three variables prediction model and single variable prediction...

Analysis of High-Tech Industry’s Development in Shandong Province Based on PLS

Xu Yang, Xingyuan Wang
From the perspective of high-tech industry’s development in Shandong province, this paper firstly identifies the influencing factors of high-tech industry’s development in Shandong province. Then those factors and the process of development in 16 years (1997-2012) are analyzed by clustering analysis...

Game Analysis of Engineering Quality Control Base on Owner and Superintendent

Hui Gao, Zhaoyi Ye, Hairong Feng
Engineering projects' quality control has always been of great concern. How to get better effect of engineering quality is worth to be discussed. Firstly, the rational behavior of the owner and the supervisor is analyzed. Then based on the two parties of owner and supervisor, the complete information...

A Lightweight Workflow Model for Performance Evaluation System of Customer Managers in the Bank

Jicheng Liu
In the performance evaluation system, it is necessary to transfer data files between some roles for supplying missing data and auditing these data. Based on the analysis of business process, the paper designs a lightweight workflow model. The establishment process of the model is discussed in detail....

Origins and Trends of the Multinational’s R&D Internationalisation Research- a Systematic Literature Review

Xingkun Liang, Zhutian Xing, Yongjiang Shi
This paper adopts bibliometric analysis on 621 literatures on multinational corporations’ (MNC) R&D internationalisation from various fields to identify key patterns of this research topic. Bibliographic data of these literatures are collected from ISI Web of Knowledge with specific search criteria (e.g....

The Complementary Effect of Knowledge Management Strategies on Firm Performance

Yi Li, Xue Zhou, Nan Zhou, Jun You
This study aims to test the relationship between knowledge management (KM) strategy and firm performance. An inductive approach is employed to refine six KM strategy orientations drawing on previous literatures. Based on survey data from 345 Chinese firms, structural equation modeling is applied to test...

Research on Initiative Knowledge Spillovers of Supply Chain Entities Based on Service-oriented Manufacturing

Danli Du, Qiu Jin, Hongyan Zhao
In the service-oriented manufacturing model, customer participation proposes higher requirements on the relationship between supply chain entities, and also provides more communication opportunities. The supply chain entities will have more opportunities and challenges to be considered as a whole, therefore,...

Research on Random Mixed-model Two-sided Assembly Line Balancing Using Genetic Algorithm

Lei Wang, Kaihu Hou, Weizhen Liao, Zhengmei Jie, Cheng Chen, Yingfeng Zhang
This paper presents a new mathematical for random mixed-model two-sided assembly line balancing. To minimize the cycle time of random mixed-model two-sided assembly line with the given number of workstation, the random mixed-model two-sided assembly line balancing problem of type II is studied. The influence...

The Capacity Preparation in the Two-period Supply Chain with Remanufacturing Products and IOT

Furong Tan, Hanjiang Zhang, Hongxia Zhong, Jiayu Zhang
In this paper, we analyze the production capacity and production decision issues in remanufacturing situations. A two-period model is introduced, in the first period, manufacturers produce and sell new products by using raw materials; in the second period, manufacturers produce new products and remanufactured...

Optimization of Supply Chain Network with Grey Uncertainty Demand by Improved Artificial Fish Swarm Algorithm

Jincheng Fang, Chang Ke, Hua Chen
This paper analyzed supply chain network optimization problem with the grey uncertainty of customer demand information, and established its mathematical models by grey system method. Then, an improved artificial fish swarm algorithm was put forward to solve the models based on binary encoding. Finally,...