Research on control measures of N, T[O] and Ti in Bearing Steel
Authors
Liang Chen
Corresponding Author
Liang Chen
Available Online October 2015.
- DOI
- 10.2991/icadme-15.2015.359How to use a DOI?
- Keywords
- Bearing steel, T[O], N, Ti
- Abstract
In allusion to the requirements of bearing steel for ultralow T[O], Ti, analyzing the effects of slag system to T[O] by FACTSAGE thermodynamic calculation. The calculation results shows that the slag system of bearing steel should be controlled in the area that SiO2 0%~20% Al2O3 25%~45% CaO 45%~65%,it is helpful to control T[O] the conclusion could be got by analyzing the control of T[O] and the content of Ti that control Als at 0.02% 0.08% is reasonable and basicity of slag need to be controlled at 5~8 in the smelting process of LF. Commerical test shows that in the bearing steel which was trial-produced TO] 15×10-6,N 60×10-6,[Ti] 30×10-6, and achieve batch production for ultralow oxygen bearing steel at last.
- Copyright
- © 2015, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Liang Chen PY - 2015/10 DA - 2015/10 TI - Research on control measures of N, T[O] and Ti in Bearing Steel BT - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering PB - Atlantis Press SP - 1941 EP - 1948 SN - 2352-5401 UR - https://doi.org/10.2991/icadme-15.2015.359 DO - 10.2991/icadme-15.2015.359 ID - Chen2015/10 ER -