Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering

Mold-filling and Solidification Simulation of Grey Iron in Lost-Foam Casting

Authors
Mingguo Xie, Changan Zhu, Jianxin Zhou
Corresponding Author
Mingguo Xie
Available Online October 2015.
DOI
10.2991/icadme-15.2015.78How to use a DOI?
Keywords
Grey cast iron, Lost foam casting, Simulation
Abstract

According to characteristic of Lost Foam Casting (LFC) processes and considering the metal flow pattern decomposition gas pressure impediment, interface elapse model is established base on gap pressure as boundary of front of melt flow. Corresponding numerical solution method is applied to simulate filling and solidification process of LFC. To verify the validity of the model, basic test model is introduced and compared the simulation results between LFC and general gravity sand casting. Finally, practical casting design of grey iron in LFC is given. The application shows that the proposed models could effectively predict the possible defect, and provide useful guidance for designer to optimize casting process solutions to directly improve the actual production.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2015
ISBN
10.2991/icadme-15.2015.78
ISSN
2352-5401
DOI
10.2991/icadme-15.2015.78How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Mingguo Xie
AU  - Changan Zhu
AU  - Jianxin Zhou
PY  - 2015/10
DA  - 2015/10
TI  - Mold-filling and Solidification Simulation of Grey Iron in Lost-Foam Casting
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 387
EP  - 394
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.78
DO  - 10.2991/icadme-15.2015.78
ID  - Xie2015/10
ER  -